Sokkia DT7C 7" Digital Theodolite

Sokkia Electronic Construction Digital Theodolite built to work longer with low power Consumption and faster with an easy-to-use control panel.

The DT Construction Series are electronic digital theodolites that combine ultra-low power consumption with Sokkias advanced absolute encoders.

Variety of display modes
You can select the angle display unit that best suits you. The Horizontal angle is able to switch between clockwise and counterclockwise, and the Hold angle and 0-set functions are also provided. The Vertical angle can be set to Zenith=0, Horizontal=0, 0-90-0, or % of slope.

Enhanced reliability with absolute encoders
Sokkias market-proven advanced absolute encoders, which utilize RAB (RAndom Bi-directional) code and digital sampling technology, further enhance the reliability of angle measurement. The DT7C ensures 7" accuracy for both horizontal and vertical angles.

Ultra-long working hours
With Sokkias new algorithm in operating absolute encoders, power consumption has been dramatically reduced. Powered by two standard C alkaline batteries, the DT Construction Series works for an astonishing 110 hours.

One-key start
You can start taking measurements as soon as you turn on the power, thanks to the absolute encoders. Moreover, azimuth is kept when restarting the instrument after turning the power off.

Easy-to-read, easy-to-use control panels
A large LCD screen provides clear angle readings under all conditions, and thanks to simple 4-key operation there is no training required.

Audible right-angle notification
Once the zero (0) horizontal angle direction is determined, the DT Construction Series emits an audible tone for each of the four right-angle directions. Specifically, it sounds two different tones within ±15° of 90° and stops beeping when it comes within ±1°.

Superior IP66 protection
Complying with the tough IP66 standard for resistance to dust and water, the DT7C offers superior dependability even under harsh environmental conditions.

Specifications

Magnification: 26x

Field of View: 1º30’ (26 m/1,000 m)

Minimum Focus: 3.0 ft. (0.9 m) from telescope center

Stadia Multiplication Constant: 100

Angle Measurement: Photoelectric absolute encorder scanning, diametrical detection

Display Unit: Degree/Gon/Mil, selectable

Display Resolutions: 5"/10"

Accuracy: (ISO 17123-3:2001) 7"

Display: LCD, 8 digits x 2 lines with backlight

Keyboard and Display: 4 Keys on One Face

Right Angle Beep: Two Tone High/Low Every 90˚

Sensitivity Of Levels Plate Level: 60"/2 mm

Sensitivity Of Levels Circular Level: 10'/2 mm

Tribrach: Fixed, Integral

Operating Temperature: -4 to +122°F (-20 to +50°C)

Dust and Water Protection: IP66 (IEC 60529:1989)

Weight With Handle: 9.3 lb (4.2 kg)

Battery: 2 "C" Type Alkaline Batteries for Approx. 110 Working Hours

Automatic Power Cut Off: Auto-off time is selectable from 5, 10, 15, 30 minutes or none.

One Year Manufacturers Warranty

Standard Accessories Included: C Alkaline Batteries (x2), Lens Cap, Lens Hood, Plumb Bob, Tool Kit, Operator’s Manual, Carrying Case and Shoulder Strap.